Commell FS-97A Manuel d'utilisateur télécharger pdf (Page 19)

FS-97A User’s Manual Hardware Setup

Complete the system Installation

2.4.4 <Complete the system installation>

After installing the CPU, CPU cooler and the memory module, please slot the main board

into PICMG slot of the backplane carefully. If you connect an ATX power supply with the

backplane, you will need to connect an ATX function cable between the main board and the

backplane.

PICMG Bus Slot

Notice:

The ATX function connector

may have different types on

different backplanes, please

check the pin assignment

for the connector on the

backplane before you install

the ATX function cable.

To power suppl

JFRNT

CN_PS

To power on the system, please check chapter 2.13 to short the power button pin

on JFRNT.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 52 53

Pas de commentaire

Commell FS-97A Manuel d'utilisateur Page 19