Commell FS-97B Manuel d'utilisateur télécharger pdf (Page 23)

FS-97B User’s Manual Hardware Setup

Onboard Display Interface

To setup the LCD, you need the component below:

1. A panel with LVDS interfaces.

2. An inverter for panel’s backlight power.

3. A LCD cable and an inverter cable.

For the cables, please follow the pin assignment of the connector to make a cable, because

every panel has its own pin assignment, so we do not provide a standard cable; please find a

local cable manufacture to make cables.

LCD Installation Guide:

1. Preparing the FS-97B, LCD panel and the backlight inverter.

2. Please check the datasheet of the panel to see the voltage of the panel, and set the

jumper JVLCD to +5V or +3.3V.

3. You would need a LVDS type cable.

4. To connect all of the devices well.

For sample illustrator only

Panel side

Board side

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Pas de commentaire

Commell FS-97B Manuel d'utilisateur Page 23